Send Email
Send SMS
Search


NABL Testing for ELECTRICAL & ELECTRONICS

Bharti Automation offers fast, expert and efficient product testing, inspection and certification solutions through our NABL approved laboratory. We conduct safety testing of Electronics and IT products as perIS:13252:2010


We offer:

1) Input current and power
2) Marking
3) Access to energised parts
4) Energy hazards
5) Plug discharge
6) stability
7) Impulse
8) Surge
9)Clearanceandcreep-age
10) Impact
11) Drop
12) Glow wire
13) Touch current
14) Electric strength
14) Temperature rise
15) Niddle flame
16) Ball pressure
17) Tracking index for material group verification etc.

Cable Testing Services Standard test methods are:

  • IS:694
  • IS:1554
  • IS:7098
  • IS:398
  • IEC:60227
  • IS:5831
  • IS:10810
  • IS:8130
Corrosion Testing service...Most people are very familiar with the rust that produces huge holes in cars and trucks and fills the junkyards with unwanted vehicles. One source indicated that up to 20% of the iron and steel products produced in the India replaced objects that have been discarded due to rust damage.

We provide corrosion testing as per.

  • ASTM B117
  • JISZ2371
  • ISO-9227/ISO- 10289
  • IEC 60068-2-11-1981
  • IS:5528-1985
  • DIN 50021
  • JSS 55555-2000
  • QM 333
Test for Special Requirement. We provide some special test parameters as per TEC/GR/FLA/LSP 001.

Testing of Battery and Ba...We provide the testing services for all types of battery... as per

IS:16046:2012
IEC:62133:2002

The test parameters are:

1) Low rate charging
2) Moulded case stress
3) Temperature cycling
4) Incorrect installation
5) External short circuit
6) Free fall
7) Thermal abuse
8) Crushing of cells
9) Low pressure cells
10) Over charge
11) Forced Discharge

Testing of Electrical Too...We have facility for testing of electrical insulating tools andaccessories.

The standard testmethodare :
  • IS:926
  • IS:15652
  • IS:4770

Induction Motor Testing

REQUEST CALLBACK

Induction Motor Testing
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / OnwardsGet Latest Price

Parameters to be Tested:-


  • Measurement of winding resistance
  • No load test at rated voltage and at different voltages to compute windage losses
  • Full load test
  • Efficiency at 75% and 100% load
  • Efficiency class (eff 1 or eff 2)

 

Relevant standards with amendments: - IS 12615:2011; IS 4029 -1967; IS 325 : 1996

Respective BEE Schedule (Refer Latest Revision):- Schedule 6

Yes! I am Interested

Motors Testing

REQUEST CALLBACK

Motors Testing
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / onwardsGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing Of Breakers And Switchgear

REQUEST CALLBACK

Testing Of Breakers And Switchgear
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of CT & PT

REQUEST CALLBACK

Testing of CT & PT
  • Testing of CT & PT
  • Testing of CT & PT
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Testing of CT & PT as per IS 2705(Part 1&2) and IS 3156 (Part 1&2)
The Test Parameters are

1)Marking
2) Short time current test
3) Temperature rise test
4) Verification of terminal marking and polarity
5)Power frequency dry withstand tests on secondary Windings
6) Accuracy test
Yes! I am Interested

Testing of Earthing

REQUEST CALLBACK

Testing of Earthing
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / onwardsGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of Lightning Arrestor

REQUEST CALLBACK

Testing of Lightning Arrestor
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of Relays

REQUEST CALLBACK

Testing of Relays
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / onwardsGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of Substation Equipments

REQUEST CALLBACK

Testing of Substation Equipments
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / onwardsGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of Transformers

REQUEST CALLBACK

Testing of Transformers
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / onwardsGet Latest Price

Established in 1991 Bhart Automation is leading Automated test and measurement industry.
Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
Yes! I am Interested

Testing of Winding Wires

REQUEST CALLBACK

Testing of Winding Wires
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Service Details:
Industry TypeManufacturer
Conductor TypeAluminium

Tests performed on Winding Wires :
  1. Dimensions
  2. Resistance
  3. Elongation
  4. Springiness
  5. Flexibility and Adherence
    1. Mandrel Winding
    2. Jerk Test
    3. Peel Test
  6. Resistance to Abrasion
  7. Heat Shock
  8. Cut-through
  9. Solvent Test
  10. Break-down Voltage
  11. Continuity of Covering
  12. Method of Test
  13. Method of Test Enameled Round Winding Wire IS:13738
  14. Material Specification Enameled Round Winding Wire IS:13730
Yes! I am Interested

Water heater Geyser Performance Tester SASO

REQUEST CALLBACK

Water heater Geyser Performance Tester SASO
  • Water heater Geyser Performance Tester SASO
  • Water heater Geyser Performance Tester SASO
  • Water heater Geyser Performance Tester SASO
  • Water heater Geyser Performance Tester SASO
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 50,000 / NUMBERSGet Latest Price

Bharti automation is a well known solution provider for manufacturing of water heater test laboratories.We undertake turnkey projects for setting up a complete lab facility for Indian and International standards.The laboratory comprises a Controlled codition chamber water flow control faicilities and a Data Acuisition system.A software is also provided to do the analysis of the data for any given standard and report generation is also provided accordingly by the software.We have supplied this facility to laboratories like UL and Saitco Saudi.

Additional Information:

  • Minimum Order Quantity: 1 NUMBERS
  • Yes! I am Interested

    Charge Conditioning

    REQUEST CALLBACK

    Charge Conditioning
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / PieceGet Latest Price

    This is normally carried out by the cell manufacturer but in some circumstances it could be the responsibility of the battery pack assembler. In any case the cells must be tested to ensure that they are ready to deliver current.

     

    Performance Monitoring

    Performance monitoring is used to verify whether the cell is continuing to perform as required once it is in use in the application for which it was specified. These are individual tests specified by t he user.

     

    There are no simple direct measurements, such as placing a voltmeter across the terminals, to determine the condition of the battery. The voltmeter reading may tell us something about the state of charge (with an enormous margin of error), but it cannot tell us how well the battery will deliver current when demanded.

     

    Internal Resistance

    It is necessary to know the internal resistance of the cell in order to calculate the Joule heat generation or I2R power loss in the cell, however a simple measurement with an ohmmeter is not possible because the current generated by the cell itself interferes with the measurement.

     

    To determine the internal resistance, first it is necessary to measure the open circuit voltage of the cell. Then a load should be connected across the cell causing a current to flow. This will reduce the cell voltage due to the IR voltage drop across the cell which corresponds to the cell's internal resistance. The cell voltage should then be measured again when the current is flowing. The resistance is calculated by ohms law from the voltage difference between the two measurements and the current which is flowing through the cell.

     

    Open Circuit Voltage OCV

    Measuring a battery's open circuit voltage is not a reliable measure of its ability to deliver current. As a battery ages, its internal resistance builds up. This will reduce the battery's ability to accept and to hold charge, but the open circuit voltage will still appear normal despite the reduced capacity of the battery. Comparing the actual internal resistance with the resistance of a new battery will provide an indication of any deterioration in battery performance.

     

    State Of Charge (SOC)

    For many applications the user needs to know how much energy is left in a battery. The SOC is also a fundamental parameter which must be monitored and controlled in Battery Management Systems. The methods of estimating the SOC are explained in the section on State Of Charge.

     

    State Of Health (SOH)

    The State of Health is a measure of a battery's ability to deliver the specified current when called upon to do so. It is an important factor for monitoring battery performance once it has entered into use. This is treated briefly in the section below and more fully in the section on State Of Health.

     

    Impedance and Conductance Testing

    The discussion about the battery equivalent circuit in the section on Performance Characteristics shows that we can expect the battery impedance to increase with age.

    Battery manufacturers have their own definitions and conventions for Impedance and Conductance based on the test method used. Though not strictly correct they serve their purpose.

     

     

     

    DC measurements

    Note that DC measurements do not recognise capacitance changes and therefore measurements of the internal resistance of the cell do not correlate so well with the SOH of the cell.

     

     

    Yes! I am Interested

    Computerized Engine Test Bed

    REQUEST CALLBACK

    Computerized Engine Test Bed
    Get Best Quote

    Thanks for Contacting Us.

    Bed is a self-contained compact unit designed for easy installation and bench mounting. An eddy current dynamometer is used to load the engine. The dynamometer is provided with a manual control of the load. The test set is supplied with, as standard, a Robin engine which is a single cylinder, four stroke, spark ignited, air-cooled, side valve type of engine. This is a typical small engine commonly used in various industrial and domestic applications throughout the world.

    The engine and dynamometer are carried on a solid steel base plate resiliently mounted within a steel framework. Included within the framework are the fuel system, which incorporates a fuel tanks and valves, and the air induction system. The instrumentation and control panel are mounted on the front frame. An additional engine, four-stroke diesel engine is supplied and easily interchangeable with the standard engine to enable characteristics comparisons. This alternative engine is air-cooled single cylinder engine.

     

    FEATURES:

    • Self contained, compact and easily installed bench mounted unit.
    • Single cylinder air-cooled and interchangeable engines:
      a. Four stroke gasoline engine (169 cc)
      b. Four stroke diesel engine (219 cc)
    • Eddy Current Dynamometer and Controller
    • Fully instrumented for air and fuel flow, temperatures, speed and power.

     

    TEST PARAMETERS:

    • Engine performance curve at full and partial load.
    • Engine efficiency and fuel consumption variation with speed and load.
    • Determination of the following engine parameters at different speed:

    - Engine torque

    - Engine power

    - Volumetric fuel consumption

    - Specific fuel consumption

    - Air flow rate

    - Air-to-fuel ratio

    - Volumetric efficiency

    - Brake mean effective pressure (bmep)


    Additional Information:

  • Minimum Order Quantity: 1 Ask Quote
  • Yes! I am Interested

    Electrical Insulation Tape Testing Services

    REQUEST CALLBACK

    Electrical Insulation Tape Testing Services
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / OnwardsGet Latest Price

    Owing streamlined facilities that we posses, we offer electrical testing services for testing electronics, hard goods, cables, appliances. Tests like vibration tests are conducted. Various components are checked for:
    • High voltage
    • Resistance dust
    • Salt spray
    Yes! I am Interested

    High Voltage Testing of Primary Equipment

    REQUEST CALLBACK

    High Voltage Testing of Primary Equipment
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 50,000 / Unit(s)Get Latest Price

    As all sites are different, our engineers will tailor the tests to suit site and client requirements. Bharti Automation regularly carries out the following routine site tests:

    Current transformer: CT ratio and phase error, CT magnetising curve, CT secondary DC resistance, CT secondary impedance, CT primary and secondary Insulation resistance, polarity.

    Voltage transformer: VT ratio, VT secondary and primary Insulation resistance, polarity. Surge arrestor Insulation resistance, variable frequency dissipation factor measurement, discharges counter check.

    Breaker switch: Contact resistance for all joints including main contact(s), insulation resistance


    Additional Information:

  • Minimum Order Quantity: 1 Unit(s)
  • Yes! I am Interested

    Safety Tests of Battery

    REQUEST CALLBACK

    Safety Tests of Battery
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / PieceGet Latest Price

    Casing

    • Strength, rigidity and flammability
    • Mould stress (Temperature)
    • Venting
    • Insulation
    • Electrolyte not under pressure
    • No leakage
    • No explosion or fire risk

     

    Protection from or tolerance to

    • Short circuit
    • Overcharge (time)
    • Overcharge (voltage)
    • Over-discharge
    • Voltage reversal
    • High temperature
    • Low temperature
    • Misuse
    • Abuse

     

    Power output - Load test

    Yes! I am Interested

    Testing Of Insulating Pliers

    REQUEST CALLBACK

    Testing Of Insulating Pliers
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / PieceGet Latest Price

    Testing Of Insulating Pliers

    We have facility for tesing of fireman Pilers as per IS:926:1985
    Yes! I am Interested

    Testing of Fireman AXE

    REQUEST CALLBACK

    Testing of Fireman AXE
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / OnwardsGet Latest Price

    We have facility for tesing of fireman AXE as per IS:926:1985
    Yes! I am Interested

    Testing of Insulators

    REQUEST CALLBACK

    Testing of Insulators
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / UnitGet Latest Price

    Testing of Insulators

    Established in 1991 Bharti  Automation is leading Automated test and measurement industry.
    Rely on us for Smart Metering, Transformer Monitoring, Electrical Testing & Site Calibration. We can set up a large laboratory or a small test rig.
    Yes! I am Interested

    Digital Spring Testing Machine

    REQUEST CALLBACK

    Digital Spring Testing Machine
    Get Best Quote

    Thanks for Contacting Us.

    Digital Spring Testing Machine is designed for conducting load-deflection test on spring or other material in tension or compression. It is a hand wheel operated machine which uses a strain gauge based load cell with microcontroller based digital load indicator with tare and peak hold features for highly stable and accurate force measurement system. The displacement is measured using standard accurate digital vernier scale. The spring testing machine is a useful instrument for testing of compression or tension springs at low affordable price.

     

    Features:

    • Hand wheel screw road arrangement operated spring testing machine to load exactly at any desired load or deflection.
    • Capacity from few grams to 5000KG using hand operated screw rod arrangement.
    • Digital reading of Load/Force with long term stability.
    • Digital reading of Displacement using accurate digital vernier scale.
    • Other applications – load/deflection testing of variety of material such as foam, rubber, cork, packing material, and for application such as pull out force, actuation force measurement etc.
    • Standard models are available with 250mm, 500mm and 1000 mm spacing.
    • Other models with custom spacing and load rating can be provided

    Additional Information:

  • Minimum Order Quantity: 1 Ask for Quote
  • Yes! I am Interested

    Hose Test Rig

    REQUEST CALLBACK

    Hose Test Rig
    Get Best Quote

    Thanks for Contacting Us.

    All hose tests are conducted in accordance with ASTM D-380.

    TESTS:-

    1. Destructive Type:

    • Burst test
    • Hold test

    2. Non-Destructive Type:

    • Proof pressure test
    • Change in length test (elongationor contraction)
    • Change in outside diameter or circumference test
    • Warp test
    • Rise test
    • Twist test
    • Kink test

    ü Volumetric expansion

     

    FEATURES:

    ü Ergonomic, safe and user-friendly design

    ü Touch panel

    • Quick serial testing through preset test pressure
    • Low noise level
    • Suitable for various test mediums such as tap water, oil, an emulsion of both and many other liquids and gases.
    • Spacious test compartment; use of pallet is possible
    • Modular and flexible design makes it possible to choose a unit in accordance with your specific requirements

    ü Each pump range is supplied with an electronic pressure transmitter for accurate measurement over the full test pressure range

    ü Fully traceable material for all high-pressure parts and components


    Additional Information:

  • Minimum Order Quantity: 1 Ask for Quote
  • Yes! I am Interested

     
    X


    Explore More Services

    Contact via E-mail
    Contact via SMS
    Bharti Automation Private Limited
    Sanjay Sharma (Director)
    Plot No. 354, Sector 7, IMT Manesar ,
    Gurgaon - 122051, Haryana, India
    Call Us: 
    Call Response Rate: 91%
    Share Us :
    F G T L



    © Bharti Automation Private Limited. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Bharti Automation Private Limited