Send Email
Send SMS
Search

Home »


Testing Solutions



Testing For BIS Compulsory Registration SchemeGet Quotation
Bharti Automation is a well equipped Testing Laboratory at Manesar.This Laboratory is recognised by BIS for testing of the products which fall under Compulsory registration Scheme (CRS)The Test Capabilities are limited to Electrical and Electronics testing to begin with but very soon Building Material and Enviornmental Testing Laboratories are coming to cater to our customers.

Yes! I am Interested




Environmental Endurance TestingGet Quotation
Environmental Condition. We provide the climatic conditioning for products and materials we do the following environmental and endurance tests as per IS: 13947IEC: 60529 IS: 12063IEC: 60947 IS: 9000IEC: 60068JSS: 55555QM: 333

Yes! I am Interested




Testing of Heavy Electrical EquipmentGet Quotation

Bharti Automation offers fast, expert and efficient product testing, inspection and certification solutions through our NABL approved laboratory. We conduct safety testing of Electronics and IT products as per IS:13252:2010


We offer:

1) Input current and power 
2) Marking
3) Access to energised parts
4) Energy hazards
5) Plug discharge
6) stability
7) Impulse 
8) Surge
9) Clearance and creep-age
10) Impact
11) Drop
12) Glow wire 
13) Touch current
14) Electric strength
14) Temperature rise 
15) Niddle flame 
16) Ball pressure
17) Tracking index for material group verification etc.
 
Cable Testing Services Standard test methods are:

  • IS:694
  • IS:1554
  • IS:7098
  • IS:398
  • IEC:60227
  • IS:5831
  • IS:10810
  • IS:8130
 Corrosion Testing service...Most people are very familiar with the rust that produces huge holes in cars and trucks and fills the junkyards with unwanted vehicles. One source indicated that up to 20% of the iron and steel products produced in the India replaced objects that have been discarded due to rust damage.

We provide corrosion testing as per.

  • ASTM B117
  • JISZ2371 
  • ISO-9227/ISO- 10289 
  • IEC 60068-2-11-1981
  • IS:5528-1985
  • DIN 50021
  • JSS 55555-2000 
  • QM 333
Test for Special Requirement. We provide some special test parameters as per TEC/GR/FLA/LSP 001.

Testing of Battery and Ba...We provide the testing services for all types of battery... as per 

IS:16046:2012 
IEC:62133:2002

The test parameters are:

1) Low rate charging
2) Moulded case stress
3) Temperature cycling
4) Incorrect installation
5) External short circuit
6) Free fall
7) Thermal abuse
8) Crushing of cells
9) Low pressure cells
10) Over charge
11) Forced Discharge

Testing of Electrical Too...We have facility for testing of electrical insulating tools and accessories.

The standard test method are :
  • IS:926
  • IS:15652
  • IS:4770

Yes! I am Interested




Toy Testing ServiceGet Quotation
Toy Testing as per 
IS:9873(part 1)/(Part 2)/(Part 3)/(Part 4)/ IS:15644
Test Parameters are
1)Mechanical and Physical Properties
2)Flammability Properties
3)Migration of Certain Elements
4) Swings, slides and similar activity toys for indoor and outdoor family domestic use
5) Safety of Electric toys

Yes! I am Interested




Calibration Of Electrical InstrumentsGet Quotation
Parameter Instruments Range
DC Current 0-100A
AC Current 0-100A
DC Voltage 0-1050V
AC Voltage 0-1050V
Resistance 0-330 M Ω
Power (UPF/LPF) (Active, Reactive, apparent) 0-20A, 75 V /
1000A*, 1000V
Power Factor 0.1 lag/lead to Unity
Frequency 0.05-10MHz
Insulation Resistance Up to 1TΩ, 5 kV
Capacitance meters 0.33 nF to 40mF,
Resistance 100 µ Ω - 1 T Ω
Time 1 mSec to 90000 Sec
Universal Calibration System / Calibrators As per manual
Oscilloscopes As per manual upto 250M.Hz.
Energy Meters / Calibrators 55 V – 290 V Direct current up to 120 A; 3 Ph-3-Wire / 3 Ph-4- Wire / 1 Ph-2-Wire
H

Yes! I am Interested




Calibration Of Mechanical InstrumentsGet Quotation
Calibration Services

The Calibration Laboratory is an independent organization and is well equipped and well-staffed and functions in accordance with ISO: IEC:17025 Standard.

The Laboratory is Accredited for Electro- Technical, Thermal, and Mechanical discipline from National accreditation board for testing and Calibration Laboratories (NABL), Department of Science and Technology Government of India. Calibration Certificates issued are acceptable worldwide.

Man and Machine Resources:

Bharti Automation enjoys dedication of 17 engineers including four Domain Experts from relevant fields.

· Five Site Engineers for Monitoring Onsite Activities and Coordinating with Client Engineers.

· Bharti Automation Technical Team is well equipped with Proper Working Tools with necessary Safety Gear.

· Though Safety trainings are imparted to all staff, Local Safety Regulations are recommended to be persuaded.

· At our Office we are equipped with all Hardware and Software for our Daily Site Execution requirements.

· We review quite often change in requirements for further improvements in our services.

· The Laboratory is equipped with all necessary standards for calibration.

· The standards are maintained in the laboratory as primary standards and onsite standards are verified regularly using these in house primary standards.

· The primary standards are calibrated by competent government or other NABL accredited private laboratories.

 

        Reliability and trace ability

At Bharti Automation we work hard to maintain reliability of test results, this is achieved by regular participation In Inter Laboratory Comparison Programs, Proficiency Testing Programs, Replicate Testing, In-Service Quality Checks etc.

Though the laboratory is accredited by NABL we maintain all standards to be calibrated in time and the trace ability is maintained minimum up to National Standards. 

NABL Consultancy Service We provide laboratory setup services including 17025 certification.

Yes! I am Interested




Calibration Of Temperature InstrumentsGet Quotation
Calibration Services

The Calibration Laboratory is an independent organization and is well equipped and well-staffed and functions in accordance with ISO: IEC:17025 Standard.

The Laboratory is Accredited for Electro- Technical, Thermal, and Mechanical discipline from National accreditation board for testing and Calibration Laboratories (NABL), Department of Science and Technology Government of India. Calibration Certificates issued are acceptable worldwide.

Man and Machine Resources:

Bharti Automation enjoys dedication of 17 engineers including four Domain Experts from relevant fields.

· Five Site Engineers for Monitoring Onsite Activities and Coordinating with Client Engineers.

· Bharti Automation Technical Team is well equipped with Proper Working Tools with necessary Safety Gear.

· Though Safety trainings are imparted to all staff, Local Safety Regulations are recommended to be persuaded.

· At our Office we are equipped with all Hardware and Software for our Daily Site Execution requirements.

· We review quite often change in requirements for further improvements in our services.

· The Laboratory is equipped with all necessary standards for calibration.

· The standards are maintained in the laboratory as primary standards and onsite standards are verified regularly using these in house primary standards.

· The primary standards are calibrated by competent government or other NABL accredited private laboratories.

 

        Reliability and trace ability

At Bharti Automation we work hard to maintain reliability of test results, this is achieved by regular participation In Inter Laboratory Comparison Programs, Proficiency Testing Programs, Replicate Testing, In-Service Quality Checks etc.

Though the laboratory is accredited by NABL we maintain all standards to be calibrated in time and the trace ability is maintained minimum up to National Standards. 

NABL Consultancy Service We provide laboratory setup services including 17025 certification.

Yes! I am Interested




Customized Test Bench SPM and Test RigsGet Quotation
Bharti Automation Has a proven track record of developing test rigs for various applications.
Nearly all major home appliance manufacturers in India are using test facilities developed by Bharti Automation in India.We have a state of art design centre in Delhi a prototype devlopment centre in Noida and Test and Assembly centre in Manesar.We have vast experience in development of Test Rigs for Automotive Industries also.We have Joint Ventres Partnership or Agreements with many Indian and International manufacturers to bridge the gap of the product ranges.We have our own team of software experts to build software programs for specific test application.We have exported testing rigs to various countries outside India and are running successfully.We have developed test rigs for various National and International standards.You jus name the standard and we shall be ready to guide you how to proceed for your test equpment requirment.

Yes! I am Interested




Remote Monitoring SystemsGet Quotation
Remote monitoring and control (M&C) systems are designed to control large or complex facilities such as factories, power plants, network operations centers, airports, and spacecraft, with some degree of automation. M&C systems may receive data from sensors, telemetry streams, user inputs, and pre-programmed procedures.
These systems are suiatable for 
  • Smart grids
  • Positive train control
  • Structural health monitoring
  • Pipeline sensors
  • Patient monitoring
  • Desktop/server monitoring
  • Transformers and Generators
  • Trucks and Tankers
  • Earth Movers and very heavy Vehicles
 

Yes! I am Interested




Turnkey Project Consultancy and InstallationGet Quotation
We undertake Turnkey projects for Laboratory Setup and Process Plants. We have experiance of 25 years in project cosultancy and we are offering following services:1. Designing of Instrumentation System for any Process Industry.2. Detail Engineering like P&I Diagram Prepration, BOQ prepration.3. Procurement assistance for major equipment.4. Supply of control panels and Indtrumentation Hardware.5. Onsite Errection and Commissioning of the Instruments Cables Piping Hardware etc.6. Software development
7. Commissioning and Training8. Post Commissioning Activities like AMC and PMC

Yes! I am Interested




Smart Prepaid Meters and SolutionsGet Quotation
We are a well known solution providers for Smart Metering in Electrical Energy, Water, and Gas Supply.We have set up a manufacturing unit in Chennai India for Smart Prepaid Energy Meters, contracted manufacturing in Punjab for Water and Tied up with Powercom of Israel for Gas Metering Solutions for Hardware Support.We have a Cloud based host application website for all or any metering requirement.Please go through our product range in metering solutions.Objectives of Smart Metering

To achieve

•Timely availability of billing data for 100 % meters •Reduce manual intervention and hence errors and manipulations •Reduce operational and maintenance cost •Detection and control of power outage •Demand forecasting •Capacity, distribution and load management

•Better customer service •Reduce T&D losses •Detect pilferage and thefts •
Essential Components of Smart Metering

1.RF/PLCC/GPRS/LAN enabled Smart Energy Meters with Auto Cut Out facility. 2.Data Concentrator Unit. 3.Communication Infrastructure as per meter selected. 4.Head End Software for Hosting the Data and Controlling the connections remotely. 5.End user utilities like Mobile Apps or Home Display

Smart Energy Meters
•Independent of communication system with a plug and play modular approach. •IS16444 complied •DLMS inbuilt confirming IS 15959
•Class 1.0, Class 2.0, Class 0.5S, class 0.2S •ABT features both in single and three phase •Programmable prepaid Postpaid Dual Source and Net Metering

Software
•GUI Based Application •User friendly menu driven configuration and operation •Multi user environment, Multitier architecture and high level of security •Faster data collection time with the help of multiple ports and data concentrators. •Supports data collection through RS485, Ethernet and RF Modem. •No limitation of tag. All the parameter in the meter can be seen. •Online data representation, graphical representation, historical data representation
•Facility to view minimum and maximum values for power parameters. •Generation of customized log sheets for production cost analysis and power cost analysis. •Reports can be converted to different formats like word, excel, pdf, csv etc… •Data can be logged from Third party meters, if the meter is provided

Yes! I am Interested




Electrical Equipment Calibration ServiceGet Quotation
Service Provider of a wide range of services which include electrical equipment calibration service.

Yes! I am Interested




Digital Energy MeterGet Quotation
Pioneers in the industry, we offer digital energy meter from India.

Yes! I am Interested




New ItemsGet Quotation
nabl accreditation

Yes! I am Interested




 


Contact via E-mail
Contact via SMS
Bharti Automation Private Limited
Sanjay Sharma (Director)
Plot No. 354, Sector 7, IMT Manesar ,
Gurgaon - 122051, Haryana, India
Call Us: 
Call Response Rate: 97%
Share Us :
F G T L



© Bharti Automation Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Bharti Automation Private Limited